Operating instructions
ON-OFF
Press the [Mode] button to switch between modes:
“Cool”………………… Cooling
“Heat”………………… Heating
“Cool” & “Heat”……… Auto mode
“Fan”…………………. Fan only
Notes:
1. During demand for cooling or heating, the active mode will flash.
2. Heat and Auto modes are not available in cool only configuration.
Press the [On/Off] button to turn the thermostat ON or OFF.
Modes
Set point
Press the [+] or [-] buttons once to view the set point temperature.
Press again to adjust the set point.
Cool
Heat
Cool
Heat
Fan
Cool
Heat
Auto
mode
Fan only
Tel: (856) 2882882
Tel: +972-3-9626462
Fax: +972-3-9626620
support@meitavtec
.
com
File: ETN24-SUPER-SH-F_operating manual.vsd
ETN24-SUPER-SH-F
Owner’s manual & Technnician Settings
Pg. 1
For 3 speed configuration:
Press and hold the [Fan] button (5 sec.) to turn Auto fan ON or OFF.
When ON, the fan will work on demand for cooling or heating,
When OFF, the fan will work continuously.
Note: Auto fan cannot be selected in Fan only mode.
For 1 speed configuration:
Press the [Fan] button to turn Auto fan ON or OFF.
When ON, the fan will work on demand for cooling or heating,
When OFF, the fan will work continuously.
Note: Auto fan cannot be selected in Fan only mode.
Note: in Oil/Gas systems, with Auto Fan ON, the fan will never be activated.
Auto fan (fan on demand)
Auto fan
OFF
Auto fan
ON
Auto Fan
Fan
Press the [Fan] button to switch between fan speeds:
“Lo”…………………… Low speed
“Me”……………...……Medium speed
“Hi”………………….…High speed
“Auto”………………….Auto speed
Note: In Auto speed, the active fan speed will flash.
Fan speeds (for 3 speed configuration only)
Low
speed
Medium
speed
High
speed
Auto
speed
Lo
Hi
Me
Lo
Hi
Me
F
o
Aux
