meitav-tec ETN-P Series, Owner'S Manual Installation And Operating Instructions

Page: 5 / 5

5
7. Operating manual
7.1 Turn the thermostat on
•
Press the ON button to activate the thermostat - The
word "ON" will appear on the display.
7.2 Turn the thermostat off
•
Press the OFF button to deactivate the thermostat -
The word “OFF” will appear on the display.
7.3 Temperature set-point adjustment
•
Press the “+” or “-” buttons - the set-point
temperature will flash and “COOL” and “SET” will
appear on display.
•
Adjust the cooling set-point temperature using the
“+” or “-” buttons.
7.4 Select modes
•
Press the MODE button to switch between the
different mode:
o
Cool
o
Heat
o
Cool/Heat (Auto change-over)
o
Fan only
In Cool, Heat and Auto change-over modes, the words “Cool” or “Heat” will flash when
there is a demand for cooling or heating.
Rev 1
On Off Mode
OFF
o
C
On Off Mode
ON
o
C
On Off Mode
o
C
ON
Set
Cool
On Off Mode
ON
o
C
Set
Cool
On Off Mode
o
C
ON
Cool
On Off Mode
o
C
ON
Heat
On Off Mode
o
C
ON
Cool
Heat
On Off Mode
o
C
ON
Fan