38
Adjusting additional handle (6)
Twist handle anticlockwise and set it to
a suitable side working position by
turning it about the drilling axis. Twist
handle clockwise to lock.
Fitting and setting depth stop (8)
Release additional handle. Insert the
straight portion of the depth stop into
the hole and, using the inserted drill bit
as a guide, set to the desired drilling
depth. Lock handle.
8 – Operation
Switching on/off
Insert the plug in a 230 V~ socket.
IMPORTANT! Always switch the
motor on before contacting the
material.
Switching on
Press the On-Off switch (5) carefully. The
machine starts. The number of revs per
minute varies according to the pressure
on the switch.
Switching off
Release the On-Off switch and wait until
the machine stops.
Switching on continuous mode
Press the On-Off switch and hold. Press
the locking button (3). Release the On-
Off switch. The machine runs at the
speed selected.
Switching off continuous mode
Press the On-Off switch. The locking
button unlocks. Release the On-Off
switch and wait until the machine stops.
9 – Mode of operation
Drilling in wood and metal
Never use the impact feature when drilling
in wood or metal. The impact drilling switch
must be positioned on “Drilling“. The
reversing switch must be set to “Forward“.
The speed is controlled by pressing the
trigger. Preselection of speed (5).
Drilling in concrete
Turn impact drilling switch on the position
“Impact Drilling“. Set reversing switch to
“Forward“. Start with a slow speed.
10 – Maintenance and
environmental
protection
Before performing any care or
maintenance work, disconnect from the
power. Clean the machine with a damp
cloth. Do not use solvents. Dry well.
Ensure that the ventilation slots are kept
free of dust. Before each use, check the
machine, the cable and accessories to
ensure that they are not damaged. Have
any repairs necessary completed by a
specialist.
1.
n
o
= 0 -1200 min
-1
2.
n
o
= 0 -2880 min
-1
5452360-Schlagbohr-man 07.05.14 14:25 Seite 38
