43
1 – Scope of supply
• Slab and tile cutter
• Plastic cover
• Angle stop
• Parallel stop
• Water tank
• 2 spanners
• 1 diamond cutting disc
• Operating instructions
• Warranty certificate
2 – Technical information
Technical specifications
Mains power supply 230 V~/50 Hz
Rated input
600W/S6: 15%
300W/S1
Ingress protection rating
IP44
Idling speed
n
0
: 2990 min
-1
Work surface
330 x 360 mm
Diamond cutting disc Ø 180 x
22.2/25.4 mm
Blade hole
25.4 mm
max. depth of cut
90°: 34mm
45°: 17mm
Cable
200 cm
Protection class
I
Subject to technical alterations.
Noise emission
L
pA
: 87,0 dB(A), L
WA
: 100,0 dB(A)
Measurement uncertainty:
K
pA
: 3,0 dB(A), K
WA
: 3,0 dB(A)
Noise information
Measured values determined according
to EN 62841–1
CAUTION! Some noise pollution
from this device is unavoidable.
For this reason, make sure that noisy
work is carried out at approved and
designated times. If necessary,
adhere to rest periods and limit the
working time to what is absolutely
necessary.
CAUTION! Exposure to noise can
cause damage to hearing.
Always wear suitable hearing protec-
Operating instructions & safety hints
WARNING! To reduce the risk of injury, please read the operating instruc-
tions carefully before using the machine for the first time and store them
with the machine. If the device is passed on to other users, these operating
instructions must be passed on with it.
GB
Page
1 – Scope of delivery
43
2 – Technical information
43
3 – Components
44
4 – Intended use
44
5 – General safety
instructions for
power tools
45
6 – Device-specific safety
instructions 48
Page
7 – Assembly and
adjust ment work
49
8 – Operation
51
9 – Way of working
52
10 – Maintenance and
environmental
protection 52
11 – Service instructions
53
Contents
5461060-Fliesenschneider-man.indd 43
5461060-Fliesenschneider-man.indd 43
12.05.22 10:13
12.05.22 10:13
