55
1 – Scope of delivery
• Cordless Drill & Screwdriver
• 2 Battery
• Charger
• Mains adapter
• 1 Bit
• Tool box
• Operating Instructions
• Guarantee
2 – Technical information
Technical data
Motor
18 V –
...
Speed
n
0
= 0 –550 min
-1
Drill diam Ø
- Wood
15 mm
- Steel
8 mm
ø max.
8 mm
Chuck
max. 10 mm
Battery
18 V –
.../1000 mAh
Charger
Typ XR-DC240400B
Prim: 200-240 V
~
/50/60 Hz
Sek: 24 V –
.../400 mA
Charging time
ca. 3–5 h
Technical changes reserved.
Noise emission/vibration
L
PA
: 71,0 dB(A), L
WA
: 82,0 dB(A).
Hand/arm vibrations a
w
:
boring: 0,953 m/s
2
,
screw-driving: 0,509 m/s
2
.
Measuring inaccuracy K = 3 dB(A)
Noise/vibration information
Measured values determined in
accordance with EN 60745.
The specified vibration emission value
was measured in accordance with a
standardised test procedure and can be
used in order to compare one electrical
tool with another.
The specified vibration emission value
can also be used for preliminary
evaluation of the disturbance.
The vibration emission value may
fluctuate from the specified value during
use of the electrical tool. These
Operating instructions & safety hints
To prevent injury, always read the operating instructions before use and
pass them on to any future owners of the tool. Keep with the tool.
GB
Page
1 – Scope of delivery
55
2 – Technical information
55
3 – Components
56
4 – Correct use
56
5 – General safety
instructions
56
6 – Safety instructions
relating specifically to
the equipment
59
Page
7 – Charging battery
60
8 – Operation
61
9 – Mode of operation
62
10 – Maintenance and
environmental
protection
63
11 – Service instructions
63
Contents
MB-5401360_Bediene.qxd 16.11.2009 16:02 Uhr Seite 55
