9. Switching ON/OFF manually
Operating modes can’t be changed during program settings. You can manually
switch on and switch off the device connected to the timer using the
MANUAL
button, or enable the automatic control according to the configured timer program-
mes again.
Press the
MANUAL
button briefly to change between the different modes. The dis-
play changes between
AUTO, ON
and
OFF
.
AUTO:
The plugged in device follows your programmed timer settings.
ON:
The timer continuously supplies power to the plugged in device, die program-
mes are disabled.
OFF:
The timer does not supply power to the plugged in device, die programmes
are disabled.
10. Program RANDOM
The random program is used to simulate attendance and can prevent burglaries.
1. Press
RND
button, display shows
R
, RANDOM function is activated.
2. When RANDOM is activated, the timer will be in ON position randomly for 10-31
minutes during the time gap----from 6:00PM to 6:00AM.
3. Press the
RND
button once again to cancel this function.
RANDOM
function can’t
be set during
PROGRAM
or
CD
setting.
4. The
RANDOM
function can only be executed in
AUTO
mode between 6:00PM
and 6:00AM.
Note: When the mode is turned from
ON
to
AUTO
, the timer will keep the setting of
ON
until the next timer program is executed.
