16
Rozdział 6
Troubleshooting
Condition
Possible cause
Solution
Standard wash / Feminine wash
Water does not flow from
the nozzle or the spray
nozzle does not extend
No water supply
Wait for the water supply in the water
supply system to be restored
The water shut-off valve is closed
Open the water shut-off valve
Abnormalities in the water supply
to the appliance
Call a plumbing service
Water spray intensity too
weak
Too low water pressure in the water
supply system
Make sure the water pressure is at least
2 bar
Clogged or scaled nozzle
Clean the cleaning nozzle
Clogged filter on water inlet line
Clean or replace the water filter
Abnormalities in the water supply
to the appliance
Call a plumbing service
The water flow is too
strong
Screw on the supply valve
Too warm water
The thermostat knob has been set
too high
Set the water temperature lower by turning
the thermostat knob backwards.
Water temperature
exceeds 45°C
Incorrect thermostat calibration
Call the customer service helpline or call
service
No temperature control
available
No hot water or cold water supply
Check that hot and cold water supplies are
provided
Thermostat malfunction
Call the customer service helpline or call
service
Water flows or drips from the
ceramic part
Close the supply valve or main water
supply. Next, call the customer service
helpline or call a service technician.
