Meinberg NUC80E, Operating Instructions Manual

Page: 5 / 20

Slave Line Booster NUC80E
NUC80E is a module to control and drive slave clocks. It needs the serial timestring of
a preconnected radio clock via the serial interface. The outputs are able to drive a line
of up to 80 slave clocks with bipolar minute and second pulses. It is possible to
cascade several NUC80E to get a number of slave lines.
An alphanumeric LED display is used to show the time and the state of operation.
Two keys are used to control and configure the unit. The actual slave clock time is
stored secondly in a buffered RAM so that the slave clocks are able to catch up the
time after a power-fail.
Keys
alphanumeric Display
Front Panel
5