8 Configuration and Status Monitoring
Output code:
If the system has direct TC output options, you can set the parameters in this menu section.
The time code output options can be set via this menu (for redundant receiver configurations via the switchover
card menu).
The time codes for the signal outputs can be provided, for example, by a
BPE module of the 2000 series, which has time code outputs.
Time Scale:
The output of the selected time code can be done with UTC or the local time. When "LOCAL TIME" is used, it
refers to the configuration of the menu point "Time zone".
IMS-TCR180
Date: December 17, 2021
19
