8 Status Monitoring of the IMS-PIO180
This chapter describes the status monitoring of the IMS-PIO180 via the web interface.
The submenu "Status" of the "IO Config" allows you to view the status of each port of installed PIO180 modules.
8.1 The SyncMon
When using the PIO180 as an input module, the SyncMon offers extensive possibilities of status monitoring. To
do this, select the menu
SyncMon
in the web interface and then
Node monitoring
.
Node monitoring
To monitor the signals applied to the PIO180, each input to be monitored must be added as node to the
SyncMon.
1.
To add a node, first click on the "Add Node" button.
2.
The menu
"Configuration of Monitoring Nodes"
opens.
3.
Select the PIO180 module in the drop down menu
"Monitoring via"
.
4.
Further specific configurations, such as the request interval [s], can be made.
5.
To save the configuration, click on the "Save Member" button.
The PIO module is now visible in the "Node Monitoring" and important input parameters can be monitored.
14
Date: 6th May 2020
IMS-PIO180 Setup Guide
