4.1 HPS100 - Global Configuration
Operating Mode
If supported, there is an option to run a NTP service in Server mode with hardware timestamp support. Select
between PTP and NTP mode at this step. It is not possible to run both modes at the same time on one TSU card.
Select Profile
User can choose among preselected sets of PTP parameters defined in profiles usually used in different indus-
tries. If the default setting “Custom“ is selected, the user can select any parameter combination available in the
global configuration section as long as the PTP standard allows it. Depending on the selected profile, there
might be profile specific parameters available which can be found in the “Profile Specific Parameters“ section
below the standard PTP parameters sections.
8
Date: 14th November 2019
IMS-HPS-100 Setup Guide
