manualshive.com logo in svg

Meinberg DCF77 PCI32, Operating Instructions Manual

Share
Download
Meinberg DCF77 PCI32 Operating Instructions Manual Download Page 3

Table of Contents

Impressum ............................................................................................ 2

Driver Diskette for DOS/Windows ...................................................... 4

General Information about DCF77 ...................................................... 5

Overview .............................................................................................. 6

Pulse Outputs .............................................................................. 6

Connectors and LEDs in the rear panel ...................................... 7

Pin Assignments of the 9 Pin Connector .................................... 8

Installing the PCI32 in your Computer ................................................ 8

Files on the Diskette shipped with the Board ...................................... 9

Support for other Operating Systems ................................................... 9

Copying the distributed Software to the Hard Disk ........................... 10

Using PCPSINFO.EXE ...................................................................... 10

The resident driver for DOS/Windows .............................................. 12

Controlling the Resident Driver ............................................... 14

Technical Specifications .................................................................... 15

Replacing the Lithium Battery ................................................. 17

CE Label ................................................................................... 17

Format of the Meinberg Standard Time String ........................ 18

PCI32 Component Layout ........................................................ 19

Summary of Contents for DCF77 PCI32





















Reviews:

No comments

Brands by name

Popular brands

Load more brands