3.4 CON/232/FO
The fiber optic module CON/232/FO converts a RS-
232 signal (TxD and RxD) into optical signals.
CON/232/FO (RxD)
CON/232/FO
RS232 to FO Converter
Standard variants (for RxD and TxD)
CON/232/FO: RS-232 (DB9 male) to 1 x FO In
and 1 x FO Out
Variants (TxD only), also as diplexer
CON/232/FO-1: TxD In (DB9 male) to 1 x FO Out
Optional up to 4 x FO Out: CON/.../FO-x /Output
3.4.1 Technical Specifications CON/232/FO
Electrical
signals:
RS-232 input/output (TxD, RxD) via male DSub9 connector
(Pin 2: TxD in, Pin 3: RxD out, Pin 5: GND)
or
RS-232 input (TxD only) via male DSub9 connector
(Pin 2: TxD in, Pin 5: GND)
Optical
Signals:
1 multimode FO output (TxD) and 1 x FO input (RxD) or
up to four multimode FO outputs via ST connectors
(for GI 50/125
µ
m or GI 62,5/125
µ
m gradient fiber)
Launchable
output power:
typ. 15
µ
W per output (into GI 62,5/125
µ
m gradient fiber)
Optical
input level:
min. 3
µ
W
Wave length:
850 nm
Signal delay:
delay of a RS-232 signal: 1
µ
s
data rate: 120 kbps
(detected with two CON/232/FO)
16
Date: 14th January 2020
FO CONVERTER
Summary of Contents for CON/232/FO
Page 2: ......
