Please observe the ME-iDS manual and the ME-iDS help file (*.chm)
for the procedure. You can open both these documents through
the “ME-iDS Control Center” or through the Windows Start menu.
Please read chapter 3.3 on page 19 for wiring of the digital I/Os.
4.1.2 Frequency Input/Output
Before you can use the “Frequency measurement” or “Pulse gener-
ator” modes, it is necessary, before opening your application, to
run the ME-iDC configuration tool in order to specify the configura-
tion for the corresponding subdevice (see also table 3 on page 21).
The programming of the frequency measurement and the pulse
generator is always done in the single operating mode. The sub-
type of the subdevices is always ME-SUBTYPE_SINGLE.
ME-5004
✔
Summary of Contents for ME-5004
Page 12: ......
