1
4
When using the flash
，
move the lever
（ ）
up.
Use of the dial and the dial with the waterproof case differs slightly from that of the camera itself.
Turn the mode dial(
).
Turn the exposure compensation dial (
).
Failing to do so could cause leaks.
If the case is not sufficiently cleaned and maintained, salt deposits may not be removed, which could lead to malfunctions.
Press the buttons while pressing the button(
).
- :
Press the buttons while pressing the button(
).
- :
or Mode,you should set the white balance to
When shooting underwater in
(Underwater)using the
FUNC
.menu.
Please note that you can set the white balance manually with the press of a aingle button if you assign the ( Custom
White Balance)function to the button (
). This is recommended for adjusting the white balance to the shooting conditions.
2
s
s
2
3
4
Setting the White Balance
Using the Mode dial and the Exposure Compensation Dial
When closing the case ,make sure that the strap is not caught in the waterproof seal,and that
the seal is free of debris.
After using the case, close it,and thoroughly wash it with clean water.
After using the Waterproof case, please make sure to remove any dirt, sand, hair or other
debris from the case before removing the camera.
2
s
1
4
When using the flash
，
move the lever
（ ）
up.
Use of the dial and the dial with the waterproof case differs slightly from that of the camera itself.
Turn the mode dial(
).
Turn the exposure compensation dial (
).
Failing to do so could cause leaks.
If the case is not sufficiently cleaned and maintained, salt deposits may not be removed, which could lead to malfunctions.
Press the buttons while pressing the button(
).
- :
Press the buttons while pressing the button(
).
- :
or Mode,you should set the white balance to
When shooting underwater in
(Underwater)using the
FUNC
.menu.
Please note that you can set the white balance manually with the press of a aingle button if you assign the ( Custom
White Balance)function to the button (
). This is recommended for adjusting the white balance to the shooting conditions.
2
s
s
2
3
4
Setting the White Balance
Using the Mode dial and the Exposure Compensation Dial
When closing the case ,make sure that the strap is not caught in the waterproof seal,and that
the seal is free of debris.
After using the case, close it,and thoroughly wash it with clean water.
After using the Waterproof case, please make sure to remove any dirt, sand, hair or other
debris from the case before removing the camera.
2
s
MK-G1X中英文说明书-拼ok.pdf
第 10 页 2012-04-24
