Meiko TopCut H, Operating Instructions Manual

Page: 14 / 18

9756269 14 / 18
10 Replacing a blade
Dismount TopCut H and place on a secure work surface. Wear robust work gloves
when working on the TopCut H.

Unscrew the blade fixture (M5 x 6
– crosshead)

Pull blade out

Install new blade, MEIKO item no.: 9658626

Replace M5 screw
1. Check working: check movement of blade fixture
Push TopCut into the bracket on the wash chamber door and screw in

2. Check working: load filled urine bag (perhaps fill with water) into TopCut holder
and close door to wash chamber.
11 Decommissioning
If the machine has been operated properly, the holder has been disinfected. The blade
is to be removed for decommissioning. The holder is made completely of stainless steel
and and can be fully recycled. If it is unclear whether the appliance is fully disinfected,
the dismounted holder must be disinfected in a cleaning and disinfection machine prior
to disposal.