11 / 18
9756269
7
Safety instructions
TopCut is necessarily equipped with a
sharp blade
at the front. When the
cutting mechanism is in the idle position, the blade is covered and only revealed
when the door to the wash chamber is closed.
If the TopCut is directly
operated by hand, the blade poses a risk of injury.
If the TopCut is bent from improper use, the blade may remain uncovered after
use. In this case, the TopCut is to be disabled immediately and secured against
use.
Insert the bags into the holder, do not throw them in as this could cause the door
to close unexpectedly.
If the bag is not correctly cut open, place it centrally in the holder and cut it open
again. If the TopCut still fails to cut it, you must inform an authorised member of
staff.
Once the chamber door has been closed, do not reopen it. Start the programme
immediately.
During servicing:
use caution when replacing the blade:
risk of injury.
Please use the cleaning and disinfection machine as instructed. If it is used or
operated differently, damage and risks may occur for which we accept no
liability.
Wear personal protective equipment (rubber gloves). In order to avoid
contaminating the door handle and the work area, gloves should be removed
after loading the TopCut. Disinfect your hands afterwards. Observe the
operator's hygiene regime.
Please read and observe the safety instructions and the operating instructions
for the cleaning and disinfection machine.
Before removing the TopCut, check whether the blade has been properly
retracted and ensure that the holder is unsoiled. Once the TopCut has been
dismounted, carry it on the side facing the cutting mechanism. Do not use
moving parts for support. Handle the TopCut with care. Do not throw, swing or
drop it.
TopCut is not to be used in devices with an automatic door. If used with an
automatic door, the increased strain on the door drive may be damaged, as may
the TopCut itself.
For your safety and to avoid danger,
only
use authentic MEIKO spare parts.
