K-200 Series • Updated 12-07
Meiko • 917 Airpark Center Drive • Nashville, TN 37217 • (800) 55-MEIKO • FAX (615) 399-6620 •
www.meiko.us
Standard Features:
•
Computer-positioned wash arms in easily-removed
manifolds feature concave, slotted nozzles to minimize
clogging, and captivated end caps.
•
Front-sloping wash tanks
•
All 304-series stainless steel construction
•
Large, easily-removed pan strainers. Models equipped with
a prewash include a separate prewash scrap basket.
•
Powerful 3hp wash pump is vertically-mounted to be self-
draining and easily removed for servicing.
•
Single-point drain connection
•
Single-point ventilation connection
•
Low-level heater protection
Meiko's K-Tronic series rack conveyor warewashers
combine state-of-the-art advanced features with
economical and reliable operation. The K-Tronic series
features the lowest water consumption of any NSF-rated
rack conveyor warewasher, and makes use of an exclusive
pumped, heated auxiliary rinse zone to make use of the
rinse water a second time for pristine, consistent results.
Meiko’s exclusive Waste Air Heat Recovery System
reclaims the waste air generated by the machine as free
energy to pre-heat the incoming rinse water, saving energy.
Other standard features include computer-positioned wash
arms (and prewash arms, on models so equipped) that
are pre-assembled into easily-removed manifolds. Wash
nozzes are slotted and concave to minimize clogging, and
feature captivated end caps which can’t be lost during
cleaning. K-Tronic series machines also feature Meiko’s
Mike 3 electronic controller, and double-wall insulated
construction. As with all products synonymous with the
name “Meiko,” engineering excellence, manufacturing
quality and performance come to the forefront in the
K-Tronic series rack conveyors.
Exclusive Features:
•
The K-Tronic series features the lowest water
consumption in the industry.
Model K-200 consumes 0.35
gallons per rack.
•
Pumped auxiliary rinse zone
supplements the final rinse
zone, providing pristine, consistent results.
•
Waste air heat recovery system
reclaims heat generated
by the machine and uses it as free energy to preheat the
incoming rinse water, reducing energy consumption and
allowing hot-water sanitizing from a cold water supply (50°F).
•
Double-wall insulated construction
retains heat inside
the machine, conserving energy and improving the working
environment.
•
Improved drive system
permits fast, smooth conveyor
travel. Rack rail-mounted pawl system does not obstruct
the wash pattern.
•
Mike 3 electronic controller
for fully automatic operation
and advanced service diagnostics. Wash and final rinse are
activated only when a rack is in place to conserve water
and detergent.
•
Model K-200
includes a 6’ 4-3/4” chamber with one pumped wash section (with 3 hp pump), pumped auxiliary rinse section
(with 3 hp pump) and pumped final rinse section (with 3/4 hp pump).
•
Model K-200 PW
adds a 19-5/8” prewash section (with 3/4 hp pump) to the base K-200 model (overall length 8’ 1/2”).
•
Model K-200 LPW
adds a 31-1/2” prewash section (with 3 hp pump) to the base K-200 model (overall length 9’ 1/4”).
K-200
K-200 PW
K-200 LPW
Options:
•
Revolutionary blower drying system - uses only 3 kW for
heating. Available in two lengths: 23-5/8” (600mm) or 35-1/2”
(900mm)
•
CSS Top Chemical Savings System
•
Hinged front access doors
•
Steam coil or electric tank heating
•
Table limit switch
•
External vent fan control
•
Single-point electrical connection
•
90° loaders and power unloaders
K-200 SERIES
HOT WATER SANITIZING
SINGLE-TANK
RACK CONVEYOR
WAREWASHERS
