Meiko Computing Surface CS-2, Manual

Page: 19 / 52

Installing the Processor Module
9
3
Power Connections
Power is supplied to the processor module by a 3-way cable that is supplied by
Meiko.
The following cable types are available:
•
Harvey Hubble to Harvey Hubble.
•
Harvey Hubble to UK 13 A outlet.
•
Harvey Hubble to US 15 A outlet.
Where several processor modules are used Meiko may also supply a mains dis-
tribution board. This connects eight modules to one power supply outlet.
•
Power distribution panel, European. Part number 65-DIST-EUR-01
•
Power distribution panel, USA. Part number 65-DIST-US-01
Warning – You must only use power cords and distributions panels that ar e
supplied by Meiko. These have the corr ect power rating for your system.
Warning – You should check that you have been supplied with the corr ect
type of power cord and distribution boards.
Fuses
Five fuses are located at the rear of the processor module as shown in Figure 3-
1 on page 15. One fuse protects the power supply unit from the incoming mains
supply. Two fuses protect the fans and 2 protect the disk drives.
•
Main fuse: standard 250 V, 15 A. Part number 22-F0100-04E150.
•
Fan fuse: anti-surge 250 V, 10 A. Part number 22-F0100-04E100.
•
Fan fuse: anti-surge 250 V, 5 A. Part number 22-F0100-04E500.
•
Disk fuse: anti-surge 250 V, 10 A. Part number 22-F0100-04E100.
•
Disk fuse: anti-surge 250 V, 5A. Part number 22-F0100-04E500.