Meiji MSD-02 Instruction Manual Download Page 3

Page: 3 / 3

TO INSTALL:

Choose a good positon to install the smoke alarm on your ceiling.

Use the screw to fix the installation panel on the ceiling.

Turn the smoke detector clockwise in order to lock it to the installation
panel tightly.

Do not place this product in a humid, dusty and/or smoking environment

V. Low Voltage Alarm

When the battery is low, the smoke detector will alarm to signal the battery must
be replaced.

Summary of Contents for MSD-02

Page 1: ...EN 14604 Introduction Design I Technical Parameters Working Voltage DC 9V Quiescent Current 10uA Alarming Current 20mA Alarming Decibel 85dB 3m LED Indicator LED Red Low Voltage Alarming 7 3V Working...

Page 2: ...the installation panel counter clockwise to remove it 2 Remove the insulated material to make sure the battery is installed correctly 3 Adjust the clips of the installation panel to the notches of th...

Page 3: ...nstallation panel on the ceiling 3 Turn the smoke detector clockwise in order to lock it to the installation panel tightly Do not place this product in a humid dusty and or smoking environment V Low V...