background image

 

Limited Warranty 

This warrants to the original purchaser that this product is free from defects in material and 
workmanship as of the date of purchase and that it will, under normal use and proper care, remain so 
for one year from the date of purchase. Missing  or initially defective parts will be replaced free of 
charge during the period of this limited warranty.  The original dated sales receipt is required for all 
warranty claims. This warranty does not cover damage which has occurred during transport from the 
point of purchase to the consumer’s home. This warranty does not cover glass,  light bulbs, remote 
controls, or batteries. 

This product is for

 

residential use only

.  Any and all commercial use of this product voids all 

warranties, and frees the manufacturer from all liability. The following will void this warranty: Damage 
caused from tampering with, modifying, or altering the fireplace insert in any manner; Damage due to 
incorrect assembly, improper care, misuse, or abuse; Damage from being used with the wrong power 
source; Water damage; Damage caused from this insert being used outdoors; Damage caused from 
this  insert  being used for excessive  periods of time;  Damage  caused  by  the  insert  being  used in a 
commercial  application; Damage from use as a primary heat source; Other misuse or abuse not 
specifically listed herein. 

This product is not intended to be used as a primary heat source. 

VENDOR DEVELOPMENT GROUP, INC.(HEREAFTER,  VDG), ITS DIRECTORS, OFFICERS, OR 
AGENTS, WILL NOT BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY,  WHETHER IN 
CONTRACT, IN TORT, OR ON ANY OTHER BASIS, FOR ANY INDIRECT, SPECIAL, PUNITIVE, 
EXEMPLARY, CONSEQUENTIAL, OR INCIDENTAL LOSS, COST, OR DAMAGE ARISING OUT OF 
OR IN CONNECTION WITH THE SALE, MAINTENANCE, USE, OR INABILITY TO USE THIS 
PRODUCT, EVEN IF VDG, OR ITS DIRECTORS, OFFICERS, OR AGENTS HAVE BEEN ADVISED 
OF THE POSSIBILITY OF SUCH LOSSES, COSTS OR DAMAGES, OR IF SUCH LOSSES, COSTS, 
OR DAMAGES ARE FORESEEABLE. IN NO EVENT WILL VDG, OR ITS OFFICERS, DIRECTORS, 
OR AGENTS BE LIABLE  FOR ANY DIRECT LOSSES, COSTS, OR DAMAGES THAT EXCEED 
THE PURCHASE PRICE OF THE PRODUCT.  

Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so 
the above limitation or exclusion may not apply to the purchaser.  This limited warranty gives you 
specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction.   

 

Thank you for purchasing this Electric Fireplace!  If you need assistance with assembly, have 

questions about the use of this product, or have missing or defective parts, please e-mail us at  

 

[email protected] 

 

Or, call us toll-free (M-F 8:30 AM to 4:30 PM Central Standard Time) at  

 

1-866-561-0731 

 

Vendor Development Group, Inc. 

Minneapolis, MN 55401 

Made in China 

 

 

 

Meijer.com

Summary of Contents for HYWN-23









Reviews: