Bale grab Rambo 3 - EN
9
6. Operation and use
1. Drive the vehicle in such a way to the first bale that the bale grab without the device hangs
right above the bale.
2. Let the bale grab sink until the frame touches the bale.
3. Clamp the bale by closing the hooks.
Put the hydraulic system back in ‘neutral’
afterwards.
4. Lift the bale and drive to the place of destination or to the next bale.
5. For the following bales: Drive again in such a way to a bale that the still empty clamping
hooks hang right above the bale and the frame touches it. Hold the grab in a way that the
wheel is pushed upwards. The valve opens and the bale will be clamped.
6.
Let the bales sink to the loading floor en put the hydraulic system in ‘return’. By doing so,
the hooks open and the bales are released. Lift the bale grab up.
7. The vehicle can now be driven away from the bales in reverse.
8. The bale grab is ready to grab and move another series of bales.
Use of the Rambo 3
Summary of Contents for Rambo 3
Page 2: ......
