Bale collector Limo Hydra – EN
15
8. Problems and solutions
The bale collector is composed by several moveable parts. Repair or replace damaged or
worn parts immediately. Spare parts are available at Meijer Holland or at suppliers.
Hydraulic fluid is a poisonous liquid that is harmful to the environment. Never
try to shut a leak with your hand. Fluid under high pressure easily penetrates
through skin and clothing and can cause serious injuries.
Assure that the baler and the tractor are turned off and that turning and moving
parts are blocked during repair works. Do this to prevent entrapment.
In case welding works are performed at the bale collector, assure that the bale
collector is completely disconnected from the baler and tractor. If this is not
possible, uncouple the battery of the tractor.
Problem
Possible cause
Solution
The rollers don’t move.
The hydraulic circuit of the bale collector is
not attached correctly to the hydraulic
system of the tractor.
Attach the hoses correctly.
Malfunction in the hydraulic system of the
tractor.
Consult the manual of the tractor.
The rollers are blocked.
Look for the blockade and remove it.
Hydraulic leakage.
Look for the leakage and seal it up.
The chain is broken.
Replace the chain.
The tailgate opens to early.
The spring of the tailgate has not enough
tension on it.
Adjust the spring (see chapter 6).
The tailgate close to soon.
The spring of the tailgate has to much
tension on it.
The rollers keep rolling at
increased speed.
The tailgate won’t reach locked position
after releasing the bales.
The smaller roller tilts back to
soon.
The spring of the smaller roller has to much
tension on it.
The bales are released to early.
The spring of the smaller roller has not
enough tension on it.
The bales get jammed.
The bale guides aren’t in the right position
Adjust the bale guides (see chapter 6)
