4
MHL:
Select MHL for the input port
HDMI:
Select HDMI/MH for the input port
VGA:
Select VGA for the input port
YPbPr:
Select YPbPr /YCbCr for the input port
AV:
Select CVBS for the input port
(Note: Use after the battery separator film is pulled out)
FIG.1.4
Remote Panel
OPERATIONG AND CONNECTION:
1.
Connect one cable from each display (monitor or projector) to the converter HDMI output.
2.
Plug the network cable, telephone line and USB cable both sides of the converter.
3.
Connect 5V power supply to the switcher and inserted into the power socket.
4.
Insert the external IR receiver into the IR IN jack.
5.
Connect one cable from signal source devices into any converter inputs, the converter will
automatically detect the signal and switch to the current input. At the same time, the HDMI output
HD signal to HDTV.
6.
Use select key or remote controller to select the input signal source.
