2.11 For charging, connecting charger output plug to the Ch.input
jack ,Charging LED light up red to show in charging status,when
charging about 2 hours the LED gleam red and green interchange,
it means full charged.
2.12 When receiver's channel selector turn to channel "0",
that is setting on auto tracking function. For cancelling this
function, turn receiver channel selector to other channels
(1~F,total 15 ch.).
2.13 When receiver setting up at channel "0" with auto tracking
function, if need to change microphone to other channel.
Please turn off the receiver switch, then adjust microphone
channel first to required channel and turn on the receiver
power again, the receiver would auto tracking the operating
microphone channel, and receiver LED light up green
indicates in good receiving condition.
2.14 If want receiver setting up not at auto tracking function. Please
turn the channel selector of receiver to one of channel from 1~F,
then trun off the receiver switch. Select microphon channel to the
same as the channel set up on receiver, and turn on he receiver
switch again to work. At this time, if want change to other channel,
could change directly on microphone and receiver to same channel.
3-1.2 TNC spring antenna *1
3-2.2 Aluminum floor stand ST-35
3. Appendix
3-1 Standard pack
3-1.1 Power supply (Adaptor) AC 110V/230V , DC 12V/1A *1
3-1.3 Handheld Mic. (TS) *1
3-2 Optional Accessories
3-2.1 Body-pack transmitter - with head-set Mic (HT) or
tie-clip Mic.(LT)
-6-
