Meicheng EJ-880T, User Manual

Page: 3 / 5

1. Connecting the supplired antenn to the antenna TNC
connector on the backi.
2. Check that the voltage of the suplired AC adapter conforms
to the voltage available in local area. Then plug the feeder
cable of the supplired AC adapter into DC IN socket on the
transmitter. Then plug the AC adapter into a power putlet.
3. Connect 6.3 o plug for the wired microphone in MIC. In
jack on the transmitter rear panel. Turn the MIC/VOL.
Control on the transmitter in clockwise to set the transmitter
input to receiver level.
4. RCA Aux. Input could connect with CD Player or other
audio source for transmissing music to receiver, then turn
the AUX/VOL. On the transmitter in colckwise to set the
transmitter input to receiver level.
B . S e t t i n g - U P
5. For monitoring the transmission audio source, connect
earphone on the front panel earphone input jack (3.5o
or 6.3o), and turn the EAR/VOL. control to proper level.
NOTICE : Prior to setting up, check that the transmitter and
receiver are tuned to the same frequency. Two or
above system operating in the same frquency can
not be used at the same time and area, so please
select the different frequencies which can be used
simultaneously at local area.