7
Supported IR Data Format
Data Format
Suitable
Not Recommended
NEC
RC5
TOSHIBA MICOM CODE
GRUNDIG CODE
SONY 12 BIT CODE
SONY 15 BIT CODE
SONY 20 BIT CODE
RCA CODE
RCM CODE
MATSUSHITA CODE
MITSUBISHI CODE
ZENITH CODE
JVC CODE
M50560-001P
MN6125H
MN6125L
MN6014_C5D7
MN6014-C6D6
MC14457P
LC7464(AHEA)
GEMINI_CM
1.
Connect your HDMI / DVI source (such as a DVD player) to the transmitting unit CV-57C-TX.
2.
Connect the IR transmitting cable to the transmitting unit CV-57C-TX, and make the IR emitter directly point
to the IR of HDMI source.
3.
Connect your HDMI / DVI display (such as a LCD TV or plasma TV) to the receiving unit CV-57C-RX.
4.
Connect the IR receiving cable to the receiving unit CV-57C-RX, and make the IR receiver directly point to the
user.
5.
Connect your LAN cables between the transmitting and receiving units.
6.
Make sure your LAN cables are tightly connected and not loose.
7.
Plug in 5V DC power cord to the power jack of the receiving unit CV-57C-RX.
8.
If a flickering or a blinking image is shown on the display, please try to adjust the rotational EQ control to
improve the cable skew. 0 stands for the strongest EQ while 7 stands for the weakest. Try adjusting the
EQ from 7 to 0.
Hardware Installation
