Figure 3: Manually Filling the Coin Tubes
Or
Manually deposit coins through the top of
the changer. Refer to the vending machine
manual to see if this second option is
available. (
Refer to Table 1 for minimum
coin tube levels on page 3.)
Checklist
Check that...
The coin changer is flush against the
vendor wall.
The coin insert chute is aligned above
the center of the coin cup.
The coin changer reject and cash box
chutes are aligned with the vendor
reject and cash box chutes.
The vendor coin return lever should
fully depress coin changer return lever
but not touch when released.
General Information / Changer Operation
...Then, to assure that the Coin Changer operates
correctly...
Test each dispense line through the service mode of
the VMC in sequence for 1 to 2 seconds. Dispense
switches are located on coin changer models
TRC-6800, TRC-6510 or TRC-6512.
Refer to the
vending machine manual for dispense operation
using service mode (models TRC-6000 or
TRC-6010XV).
Make sure a vend price is set. Do a test vend by
inserting more than the vend price. Make sure that
proper change is paid back and that there are
sufficient coins in the coin tubes to make proper
change. Replace dispensed coins in tubes.
Refer to
vending machine manual for operation of setprice
mode.
Check escrow return by inserting coins of various
denominations to within 5¢ or more of vend price.
Request escrow return by depressing the return
button.
5
