HT 6550200200
KC-326B HUMIDITY AND ENVIRONMENTAL PRESSURE METER
Page - 11
◦ If you use only the battery, the recorded data will be saved before the low battery
symbol appears. After the low battery
symbol appears, the recording will stop and save the previous data. If the device has the low battery symbol activated, you
cannot save any data.
◦ Connect the 5V power supply instead of downloading data via USB, the P
C connection symbol will not appear. At this
time, only external power is supplied. By connecting the 5V power supply you can ensure that the unit will work for a long
period of time and will not shut down. When connecting the power or external USB to the PC, the device will cancel the
auto power off function. The "APO" symbol will disappear. The recording function will not be changed.
◦
Adjustment of PC and data transmission
◦
◦
◦ When connecting the device, if the unit is in the auto
-recording state, you need to exit to the manual state
(the "LOG" symbol will disappear from the display) to continue communication with the PC.
◦
◦ Connect the PC via USB,
and the symbol will appear on the screen. This will indicate that the connection
has been made correctly. At this time, we can use the PC to perform the configuration and download data
(please refer to the user manual). The unit will cancel the auto power off function and the "APO" symbol will
disappear. After the communication, close the program, the PC symbol will not disappear and the data
recording will stop. Disconnect the USB cable from the PC and the PC connection symbol
disappears and a
new recording can be made.
◦
After successful connection and data transfer, do not work with the device. When disconnecting the device
from the PC, turn the unit off and on again to continue working.
◦
Device lighting control
◦ The device ligh
t will turn off if there is no action after 30 seconds.
◦
Auto Power Off Settings
◦
◦
◦ Press the power button and the "APO" symbol will be displayed on the screen. The device will turn itself off in
30 minutes with 3 beeps.
◦
◦ Press the ZERO/WBT button to turn on the device again and the "APO" symbol will disappear.
The Auto
Power Off Function.
Note: When the auto recording mode is on or the external power supply is connected, the auto power off function
stops automatically and the "APO" symbol will disappear..
PRECAUTIONS
- Do not drop the product or use it by force.
- Do not disassemble the product to avoid breakdowns.
- Replace the protective cap when not in use.
- Do not place the product with corrosive gas.
- Keep the device clean.
- Avoid dust and water.
- Do not immerse the product in water as it will be damaged.
•
- Please remove the battery if you are not going to use it for a
while..
