Using 4 Way DIL & Rotary Data Switches
To achieve a successful change to the configuration of
the validator the following procedure must be followed.
1.
Switch
OFF
the power to the validator.
2.
Set the 4 way
DIL
switches to the
configuration settings required. (See Product
Configuration Table)
3.
Select the required data / channel position
using the rotary data switch. (see product
configuration table)
4.
Switch the validator power
ON
. (The
LED
will
start flashing).
5.
Return the 4 way
DIL
teach switches back to
Normal Operation Settings. (Switches 2,3 & 4
set to all
ON
or all
OFF
).
6.
The
LED
will stop flashing and will stay
ON
.
This will indicate a successful change and that
the validator is ready for normal operation.
NOTE:- If teach is entered by mistake, switch
OFF
the power to the validator before moving the 4 way
DIL
switch positions else the mech. may learn
something unintentionally.
No power to validator
OFF
Validator is set in teach mode
Flashing
Coin inhibited by validator or machine
4 x Flash
Coin inhibited by validator
3 x Flash
Coin rejected as unrecognised
2 x Flash
Reject lever pressed or coin accepted
1 x Flash
Power is
ON
validator is O.K.
ON
MEANING
STATE
What Is The Green
LED
Doing?
Product Configuration
Normal Operation Settings
2
3
4
ON
1
2
3
4
ON
1
Set switches 2, 3 & 4 to
OFF or ON
-
F
Auto configuration
-
D
Parallel output
ON
OFF
OFF
-
C
Binary coded output
Selecting Machine Interface Types
-
-
-
OFF
-
Set the alarm
OFF
-
-
-
ON
-
Set the alarm
ON
ON
OFF
ON
-
E
Fraud Defence teach channel 0
OFF
ON
ON
-
s
E or F
Self teach a token for channel 1
ON
ON
OFF
-
s
E or F
Self teach a token for channel 0
OFF
OFF
ON
-
0 - F
Enable a coin or token channel
OFF
ON
OFF
-
0 - F
Inhibit a coin or token channel
SW4
SW3
SW2
SW1
2
3
4
ON
1
2
3
4
ON
1
Channel
Position
Product Configuration Table
What Do You Want To Do?
w
E = Tight Window Limits. Channel F = Standard Window
Limits
x 8
Token material outside
acceptable limits
x 7
Token diameter outside
acceptable limits
x 6
Check that there are no mixed
sample tokens
Token thickness outside
acceptable limits
x 5
Ensure that the rotary switch is
set to “F”
Incorrectly set rotary
switch position
x 4
Ensure at least 10 tokens have
been inserted
Not enough sample tokens
inserted
x 3
No activity was registered
within 30 seconds
Validator timed out
x 2
Reason/Action
Description
for Code
LED
Flashes
Teaching Token (
LED
Assistance Codes)
