If the power lead supplied is not suitable for your mains connection,
do not use an adaptor. Always use a power lead fitted with the correct
plug.
The instrument is fitted with a two-pin IEC60320 power inlet. Most
power leads are made with three-core cable, so the ground connection
will not be used.
Power lead connection table
Connection
UK/International USA
Earth/Ground Yellow/Green
Green
Neutral
Blue
White
Live (Line)
Brown
Black
If using a fused plug, ensure that it is fitted with a 3 Amp fuse.
The instrument can be powered from 85 - 265 Vrms a.c. at 50/60 Hz.
The battery will charge as long as the mains supply is connected, except
when a test is in progress. The power On/Off button has a green LED,
which illuminates when mains power is present. For optimum battery
life, charge the battery after each use. A completely exhausted battery
will take 14 hours to recharge.
POWER LEAD AND BATTERY CHARGING
5
Cleaning
Disconnect the instrument and wipe it with a clean cloth slightly
damped with soapy water or Isopropyl alcohol (IPA).
