Safety is the responsibility of the user
Only qualified and trained personnel should operate the MWA300. Operator must read and understand this entire instruction manual prior
to operating the equipment. Operator must follow instruction manual and attend to the equipment while in use. In the event of equipment
malfunction, the unit should immediately be de-energized and returned to Megger for repair. The safety precautions herein are not intended to
replace your company’s safety procedures.
Refer to IEEE 510 - 1983, “IEEE Recommended Practices for Safety in High-Voltage and High-Power Testing” for additional information.
Read the MWA300 manual before operating equipment.
This guide is not meant to replace manual.
Connect Leads / Power / Ground
After
INT/EXT switch
set to EXT
(PC operation)
Before
Black to Low
Voltage Secondary
or Tertiary Winding
MWA300 Quick Start Guide
MWA300_QG_EN_V01
1
Red to High
Voltage
Primary Winding
