Operating the MTO210
AVTMTO210 Rev 7 Sept 2013
23
FIRMWARE UPDATE MODE
The MTO has two processors, commonly referred to as the bottom and top
processor. Each processor requires software to function properly. This section
describes the method for changing the firmware on an MTO
ATTAINING THE LATEST SOFTWARE:
The best way to attain the latest software is to visit Megger.com.
Once you are on the site,
1.
Select the country you are located in.
2.
You may have to register to log in on the site.
3.
Select Software Downloads.
4.
Select MTO. There should be a list of software available for download.
5.
Select the latest firmware version available. The software is self contained
as a ZIP file.
6.
Download the file and run. The software will self extract and run
automatically.
7.
A Megger Welcome Screen will appear on the PC display. Before moving
forward connect the PC to the MTO210 via an Ethernet cable.
8.
Follow the instructions on the screen and the software will guide you
thru the process of selecting the Ethernet Interface, verifying that the
MTO is connected, power cycling the MTO to synchronize the boot
loader with the PC, selecting the file for download and actually
downloading the software.
Summary of Contents for MTO210
