Single Pole Phase Check
Detach lead
Grip firmly
Neutral
Live
G
Warning
The MET1000 Single Pole Check feature consists of using only one test lead
connected to the MET1000, remove second test lead if fitted.
To carry out Single Pole Check test, while firmly holding the MET1000 connect the
test lead into a live circuit, this will cause the hazard symbol to illuminate without
any voltage being displayed on the screen.
If a voltage appears on the screen then use 2 Pole method to prove the circuit live.
www.megger.com
MET1000-DE
7
Voltage/Continuity/Single Pole Mode
