DET2/3
12
Set-up
Set-up
This section details the instrument set-up.
Modify parameters
1. Set the
Mode
switch to
.
2. Press
OK
to select a set-up group.
3. See instructions below for each set-up group.
Note:
The set-up group screen is not active until
OK
is pressed.
Setting in
bold
: Current setting
Setting underlined: Current selection
General set-up
1. Press
to scroll through the parameters
2. Press
OK
to select the highlighted parameter.
3. Use
to move left and right through the parameter options.
Date / Time
1. Press
to modify current selected setting.
2. Press
OK
to accept.
Auto Off / Auto Dim / Brightness
1. Press
to modify current selected setting.
2. Press
OK
to accept.
OK
must be pressed to exit the parameter, even if no parameter was modified.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
