Approved Repair Companies
A number of independent instrument repair companies have been
approved for repair work on most Megger equipment, using genuine
Megger spare parts. Consult the Appointed Distributor / Agent regarding
spare parts, repair facilities and advice on the best course of action to
take.
Returning Test set for Repair
If returning a test set to the manufacturer for repair, it should be sent
freight pre-paid to the appropriate address. A copy of the Invoice and of
the packing note should be sent simultaneously by airmail to expedite
clearance though Customs. A repair estimate showing freight return and
other charges will be submitted to the sender, if required, before work
on the test set commences.
NOTE: There are no user serviceable or replaceable parts,
including the batteries, in this instrument. Any repairs must only
be carried out by authorised and suitably trained and qualified
personnel.
The test set circuit contains static sensitive devices, and care must be
taken in handling the printed circuit board. If the protection of a test set
has been impaired it should not be used, and be sent for repair by
suitably trained and qualified personnel. The protection likely to be
impaired if, for example, the set shows visible damage, fails to perform
the intended measurements, has been subjected to prolonged storage
under unfavorable conditions, or has been exposed to severe transport
stresses.
New test sets are Guaranteed for 3 Years from the Date of Purchase by
the User.
Note:
Any unauthorized prior repair or adjustment will automatically
invalidate the Warranty.
Instrument Repair and Spare Parts
For service requirements for Megger® equipment contact:
Megger Limited
or
Megger
Archcliffe Road
Valley Forge Corporate Center
Dover
2621 Van Buren Avenue
Kent, CT17 9EN
Norristown, PA 19403
England
U.S.A
Tel: +44 (0) 1304 502 243
Tel: +1 (610) 676-8579
Fax: +44 (0) 1304 207 342
Fax: +1 (610) 676-8625
or an approved repair company.
22
REPAIR AND WARRANTY
BERT_20E1_6172-871_UG_V02 05/05/2004 8:24 am Page 22
