൘
Checking the product
Product installation
4
ENG
Please check if the product contains the following items.
If there are items missing, please contact our technical services.
1. TFT LCD monitor
2. User's manual (including product warranty card)
3. AC to DC adaptor
4. Power cable
5. Signal cable (15Pin D-SUB cable)
6. Audio cable
൘
Installation
1. Please, turn on MV220, before connecting any device to it.
2. Connect adaptor cable to DC power-on on the rear side of MV220,
then connect power cord to adaptor.
3. MV220 has 15pin D-SUB port, DVI-D and Component port.
Connect the cables properly to your PC between D-sub, DVI, Component.
4. Turn on your PC and MV220.
5. Seeing MV220's working, you can adjust display condition with pushing
control buttons on front side of MV220.
6. As user's convience, you can adjust the display angle of MV220
under 3 degree to front, at under 25 degree to backward.
7. Please, turn it off, if you want stop using MV220.
3
25
Caution
Adjusting LCD panel angle
- Do not hold or press down on the monitor’s
screen while adjusting angle since LCD
panel maybe damaged or break if severe.
- Do not lean backward excessively so that
the monitor does not fall backwards.
- Be careful of potential damage to the stand
while adjusting angle.
Summary of Contents for MV220FB
Page 1: ...Rev 00...
