![Megatron MEGATRON FERA Series Instruction Manual Download Page 2](http://html1.mh-extra.com/html/megatron/megatron-fera-series/megatron-fera-series_instruction-manual_1765290002.webp)
MEGATRON
®
LED Triproof Luminaire –
FERA
with and without PIR-Sensor
TECHNICAL SPECIFICATION:
Instruction Manual
Series Name
MEGATRON
®
FERA without PIR-Sensor
MEGATRON
®
FERA with PIR-Sensor
Model Number
MT77330
MT77332
MT77334
MT77331
MT77333
MT77335
Color
Grey
Grey
Grey
Grey
Grey
Grey
Wattage
16W
30W
40W
16W
30W
40W
Lumen
1600lm
3600lm
4700lm
1600lm
3600lm
4700lm
Voltage
Frequency
IP Rating
Through Wiring Option
220-240V
50Hz
IP65
Yes (max. 25 x
16W)
220-240V
50Hz
IP65
Yes (max. 14 x
30W)
220-240V
50Hz
IP65
Yes (max. 10 x
40W)
220-240V
50Hz
IP65
No
220-240V
50Hz
IP65
No
220-240V
50Hz
IP65
No
•
Detection range: max. 5m at 120°
scan
•
Recognition method: Passive Infrared (PIR)
•
Duration time (lighting time) approx. 5 minutes
IDV GmbH | Birkenweiherstraße 2 | D-63505 Langenselbold | Germany | www.megatron-licht.eu
GB
INTRODUCTION PIR:
The MEGATRON
®
FERA triproof luminaires MT77331, MT77333, MT77335 incorporate a PIR (Passive Infra Red) sensing device, which continuously scans a preset operating zone and
immediately switches the light ON, when it detects movement in that area.
This means that, whenever movement is detected within the range of the sensor, the light will switch ON automatically, to illuminate the area you have selected to light up. If there is
movement within the range of the unit, the light will remain ON.
The PIR sensor can be switched ON and OFF at convenience, by pressing the switch located at the end cap side of the luminaire.
If the PIR sensor is switched off by the end cap switch, then the luminaire will light up permanently, when turned on by wall switch (no sensor function).
MOUNTING INSTRUCTION:
To achieve the best results, we suggest to take the following points into consideration:
•
Do not mount on a surface that is vibrating.
•
Avoid positioning the sensor unit adjacent or opposite to a bright light source, which may prevent the unit from operating, Avoid positioning the sensor unit adjacent or opposite to
a bright light source, which may prevent the unit from operating. Furthermore, avoid nuisance / false triggering by directing the sensor away from:
- Trees and shrubs,
- Reflective surfaces such as water surfaces (swimming pools),
- Heat sources such as boiler flues.
The detection range of the sensor can be altered by the mounting height and environment, and can be influenced by temperature change.
MOUNTING:
CAUTIONS:
•
Read the entire manual carefully before installation and operation.
•
Installation or replacement should be performed only by licensed and qualified electricians.
•
DO NOT disassemble the inner part of the luminaire. Doing so may result in luminaire damage or malfunction.
•
Switch OFF the power source before installation, replacement and cleaning!
•
Wearing gloves during installation is recommended to ensure the luminaire is kept in the best condition.
•
Before replacement of the luminaire, turn it off and allow it to cool down. Heat-resistant gloves are mandatory when handling the luminaire.
•
The manufacturer accepts no liability for any damage resulting from the misuse of the luminaire or from when it is used with inappropriate equipment.
•
Consult your dealer if you have any enquiries.
•
Important warning for drilling in walls: before drilling, make sure that there are no gas and water pipes or power lines behind or near the drilling spots. Drilling and mounting
should be performed only by qualified personnel. Be sure to pay attention at the condition and material of the walls, as the mounting material is not suitable for all wall types.
Please inquire about recommended screws and raw plugs for your wall type and wall condition. The manufacturer accepts no liability for improper wall raw plug mounting and
the herefrom resulting damages.
PROPERTIES PIR-SENSOR:
•
Designed for indoor and outdoor applications.
•
Instant start is allowed
•
The operating temperature of the luminaire is -30°
C to +45°
C
2 pcs.
2 pcs.
2 pcs.
ATTENTION:
INCLUDED PARTS:
1.
2.
3.
4.
5.
6.
8.
7.
Brown
Blue
up to max. 400W/2A
Through wiring option (L+N) for
MT77330, MT77332, MT77334
Ceiling/
Wall mounting:
OFF
ON
Correct disposal of this product:
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly, to promote the sustainable reuse of material resources. To return your device, please use the
return and collection systems, or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
5m
120