MEGATRON
®
LED Rechargeable Working Fixture –
HELFA S
Instruction Manual
ATTENTION:
•
Designed for indoor applications.
•
The operating temperature of the fixture is -20°C to +45°C.
IDV GmbH | Birkenweiherstraße 2 | D-63505 Langenselbold | Germany | www.megatron-licht.eu
GB
CAUTIONS:
•
Read the entire manual carefully before operation.
•
DO NOT disassemble the inner part of the working fixture. Doing so may result in fixture damage or malfunction.
•
Switch OFF the power source and allow the fixture to cool down before cleaning!
•
The minimum safety distance from the illuminated object is 0,2m.
•
Use only certified Lithium-Ion 18650 type batteries from renown brands to operate the fixture.
•
The manufacturer accepts no liability for any damage resulting from the misuse of the fixture or from when it is used with inappropriate equipment or
non-certified batteries.
•
Consult your dealer if you have any enquiries.
Dear Customer,
Thank You for choosing the LIGHTME
®
LED rechargeable working fixture HELFA S.
Type
18650 Lithium-Ion
Capacity
2x2200mAh (16,28Wh)
Volt
DC3,7V
Rechargeable Battery
Battery Replacement
Accessory: incl. USB charging cable
1.
Open the battery compart-
ment
2.
Replace the batteries inside
and pay attention to the cor-
rect battery polarity
3.
Close the battery compart-
ment
The cordless LED working fixture is powered by two high quality Lithium-Ion 18650 type batteries. The batteries are delivered partially charged. Please
charge the LED working fixture before first usage until the battery indication bar on the front is full. The operating time of the full battery amounts to 5
hours (regular charging time approx. 7 hours). Avoid complete discharge in order to protect the battery life. Do not charge and turn the fixture on at
the same time.
Charging
1. Connect the USB cable, which is included in the delivery, to the micro USB port of the LED working fixture.
2. Connect the charging cable to a power source, f. ex. computer, power bank or USB adaptor (Output: 5V DC/1A). The integrated battery indication
bar shows the charging level of the battery.
Powerbank Function
1. Connect the USB cable, which is included in the delivery, to the USB port of the LED working fixture.
2. Connect the charging cable by micro USB to the device to be charged. The fixture is acting as power source (Output: 5V DC/600mA). The integrated
battery indication bar shows the available power capacity of the fixture as powerbank.
Multifunction Light with 4 Functions
1.
1 x ON: directional 3W COB light (300lm at 100%)
2.
2 x ON: COB light dimming function - directional 3W COB light (150lm at 50%)
3.
3 x ON: wide flood 3W light (300lm)
4.
4 x ON: SOS function (orange blinking light)
Battery & Lamp Disposal:
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device or the used rechargeable battery, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe recycling. Batteries containing hazardous substance are marked by
a recycling symbol and chemical symbols (Cd, Hg or Pb) of the hazardou substances involved.
----
0,2m
