INJ-IG01-95W
Industrial Hardened Gigabit 95W POE Injector User Manual
3
and the power supply is functioning normally.
b) Connect the Ethernet Port to the network equipment (Switch or Hub), Connect the PoE Out Port to the
Power Device (PoE IP-CAM).
c) After all cables are correctly connected, the indicators will be lit as per port status LED Indicators.
Interface
RJ-45 Pin Assignment
Pin
Signal Name
1
TP0+
Positive (VCC+)
2
TP0-
Positive (VCC+)
3
TP1+
Negative (VCC-)
4
TP2+
Positive (VCC+)
5
TP2-
Positive (VCC+)
6
TP1-
Negative (VCC-)
7
TP3+
Negative (VCC-)
8
TP3-
Negative (VCC-)
Power Connection
Pin
Description
V -
V +
Power Input
GND
+52~56VDC
Cable Connections
Signal Type
Cable Type
Connector
Ethernet
Cat. 5 or above
RJ45
Power supply
Power cable
2-pin Terminal Block
LED Indicators
Indicator
Color
Status
Description
PWR
Green
ON
Powered ON
PoE
Green
ON
PoE is activated.
Blinking
A Power Device (PD) is being detected.
OFF
No device is connected or the connected device is not a PD.
