Settings
NetFeeler Mini
15
5.5.
How to set InfraRed Beam Detector
InfraRed Beam Detector can be installed on a fence, door,
window, access way, corridor, balcony or where access detection
is required. If the InfraRed Beam is interrupted, the detector will
sound an alarm and send a signal to NetFeeler Mini.
Note: An external 9~12V power input is required.
To setup:
1. Hold both caps (black) on the InfraRed Beam detector and
pull in opposite direction to reveal the DIP switch (see Fig.
9.).
2. Locate DIPs number 1 to 8 and set to
“
+ + - - - - - -
“
3. The next set of DIP switch on the right is labeled in reverse
from 13 to 10. Set these from RIGHT to LEFT
“
- - + +
”
Summary of Contents for NetFeeler Mini
Page 1: ...NetFeeler Mini N Ne et tF Fe ee el le er r M Mi in ni i User Manual...
Page 2: ......
Page 4: ......
