MEGASTEK MT80Q, User Manual, Page: 9 / 29

- 9 -
9
4.4.4 Charging
- Use AC adapter, the charge time is about 2.5-3 hours.
4.4.5 ON/OFF
- Press the power switch for 5 seconds and tracker will turn on/off.
Note: after connected with the belt, tracker only can be turned on and can not be turned off!
4.4.6 Parameters setup
- Tracker only supports APP setup software by smart phone or by sending command via SMS.
After setup, please turn the tracker on and positioning in an open environment, please do it
every time after turn the tracker on.
5. Change password
Configure tracker by sending SMS commands or through GPRS platform, and the default
password is 000000. This manual only introduce for how to setup parameters via SMS,
Practical application may vary when accessorizing differently, please kindly note.
SMS Command: $SMS,******;W001,######;!
Description: change user’s password
Explain:
******: user password, the range of 6 digits, default password is 000000.
（
Note : please switch to English input method when you editing command by phone; Device
will only accept commands from a user with the correct password. Command will be ignored
if with wrong password.
）
######: new password, the range of 6 digits.
Example:
$SMS,000000;W001,123456;!
Read device password
：
$SMS,000000;R001;!
Delete device password
：
$SMS,000000;C001;!