09
ENGLISH
5. First installation
1. Connect the TV to the power supply and turn on the power switch at the bottom of
the housing. The TV is now in standby mode (LED is RED).
2. Then press the Power button on the remote control (LED is BLUE).
3. After the TV is started, the First Installation menu appears. You can now make the
following settings:
• OSD language:
Choose your language. To
change, use the
t
u
buttons.
• Country:
Choose the country. To change,
use the
t
u
buttons.
• TV connection
: Use the
t
u
buttons to
choose the type of reception (satellite,
antenna or cable)
• Tuner mode:
Choose between DTV (Digi-
tal) or ATV (Analog)
• Load standard program list
: The
preinstalled channel list is loaded.
• Fast Scan Mode:
Searches the satellite
for predefined programs (selectable by
provider).
• Standard program search:
In satellite mode, the preinstalled channel list is
loaded. Here are other settings e.g. Unicable can be set.
Example in satellite mode
Note:
If you are using the TV in satellite mode, you can confirm all setting points with
OK during the initial installation!
Press OK to confirm the entries or MENU to cancel.
Press OK to confirm the entries or MENU to cancel.
Confirm your chosen search function with
OK. Now press the
t
button (Yes) to start
the search. Use the
u
button (No) to cancel
the search.
