Megasat Royal Line 2 Smart 19, User Manual

Page: 47 / 64

Transponder
Delete (RED button) Deletes the selected transponder. Confirm the irrevocable deletion
process with OK.
Edit (GREEN button) Change the frequency, symbol rate and polarity of the selected
transponder. Then confirm with OK.
New (YELLOW key) Add a new transponder. Enter the frequency, symbol rate and
polarity of the new transponder. Then confirm with OK.
Search (BLUE button) Start the search with the selected transponder. Select the search
mode, the transmitter and the service type. Then confirm with OK.
Antenna adjustment
LNB-Typ
Change the LNB type here (default: 09750 / 10600)
LNB-voltage Change the LNB power supply here (default: On)
22 KHz Set the 22 KHz setting to on / off (default: Auto)
Toneburst Choose between none, Burst A, and Burst B
DiSEqC 1.0 Choose between none, LNB 1 to LNB 4
DiSEqC 1.1 Choose between none, LNB 1 to LNB 16
Unicable Select „On“ if you use the TV on a Unicable installation. If you have
activated Unicable, you must then enter the frequency of your
Unicable installation.
15 ENGLISH
6. Main menu
Note:
If new TV channels are available, but they are not in your TV list, do the following:
1. Find out the frequency of the new station (e.g. on „ www.satindex.de “).
2. Go to the menu Satellite Scan .
3. Select the appropriate satellite (e.g. Astra 19.2E) in the „ Satellite “ column
(a hack must appear before the transponder).
4. In the „ Transponder “ column, select the transponder of the transmitter (e.g. 12.188 H 27.500)
(a tick must appear before the transponder).
5. Press the BLUE button to start the search on this transonder. (Newly found stations are
automatically added to the station list).
Note:
Usually you do not need to make any changes in the antenna settings. It is recommended that
only experienced users change the settings.