Megasat MEG-910W, User Manual, Page: 16 / 27

ENGLISH ENGLISH
04 05
Connection example Connection variant 1
Smart TV and mobile devices
HDMI
HDMI
LAN
TV
Set-top box or other
playback sources
Wi-F
i 5G
DLNA HDD PC / Laptop
Internet Router
Optional Connections
Direct connection from Wireless HD Streamer to TV or mobile device:
Connect the streamer with the television and your HDMI source (eg satellite receiver)
via HDMI. Connect the power supply of the streamer and press the power button. The
red standby light turns green. Pressing the menu key to open the main menu of the
streamer. Navigate with the arrow buttons, scroll to „Network“ and press the OK button.
Switch to the wireless 5GHz option and check that this feature is enabled. Press the op-
tion „wireless 5GHz: enabled/disabled“ again, you have now the option to change the
setting. With the „Apply“ button the settings are saved. The words „the streamer must
be restarted“ appears. Confirm with „Yes“ to confirm the settings or „No“ to cancel. After
restarting the device, go to the „Wirless Security“ menu and check the setting. The unit
should be operated as standard with active Wirless-Code, because some devices can not
connect without a password request. The default password is: 12345678
This you can see, edit or modify under the option „password PSK“.
After successful adjustment please download your app or software for your device and
launch the application. For more information, see „Install App“ and on our website.
Note:
A direct connection between the Streamer and your mobile device (or TV) can
only be established through a 5G connection. If your device does not support this func-
tion, a direct connection is not possible. In this case, the streamer must be connected
through your Internet router. Read more about this on the next page.
Smart TV and mobile devices
HDMI
HDMI
TV
Set-top box or other
playback sources
Wi-Fi
5G