Safety Instructions
Disposal Instructions
1+
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appoin-
ted by the government or the local authorities.
3. The correct disposal of your old appliance will
help prevent potential negative consequences
for the environment and human health.
4. For more detailed information about disposal
of your old appliance, please contact your city
office, waste disposal service or the shop where
you purchased the product.
WARNING!
• Modifications and changes to the device
lead to loss of warranty.
• Incorrect software installation leads to loss
of warranty.
• This instruction might be modified without
prior notice.
Status: 1.0 February 2015
Technical changes, misprints and errors reserved.
Megasat Werke GmbH | Industriestraße 4a | D-97618 Niederlauer
www.megasat.tv | [email protected]
More Informations you will found on our Hompage:
www.megasat.tv
Please read the safety instructions carefully before using the device.
The manufacturer takes no responsibility for incorrect handling of the device.
• For sufficient ventilation,leave enough space.
• If unused for a prolonged amount of time,turn the power OFF.
• Do not cover the device ventilation openings with items such as newpapers, table
cloths, curtains etc.
• Do not expose the device to liquid,moisture, direct sunlight and extreme weather.
• Do not place open flame sources,such as lighted candles, near or on the device.
• Do not place any containers with liquid,such as vases, on the device.
• Do not connect or modify cables while the device is connected to the power.
• Do not remove the cover. Risk of electric shock!
• Do not touch the device with wet hands. Risk of electric shock!
• Do not put any metal items into the slots or ventilation openings.
• Please disconnect your device from the main power during thunder or heavy storms.
• Disconnect the main power cable if the power cord is damaged.
• Cleaning : Disconnect the main power cord before cleaning the cover. Use a slightly
damp cloth without cleaning agents.
• Connect the device only to suitable sockets. Do not allow overloads to occur.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
Summary of Contents for iqon force 1+
Page 1: ...Schnellanleitung force 1 ...
Page 9: ...Quick Guide force 1 ...
