Megasat HD 7 Combo, User Manual, Page: 45 / 80

2. Designations and key assignment
05
ENGLISH
1. Display
8,9 inch (22,6 cm) Touch-Screen-Colordisplay
2. DVB-S
13V: The LED lights up when the 13V LNB power supply for the
vertical plane is switched on.
18V: The LED lights up when the 18V LNB power supply for the
vertical plane is switched on.
22k: The LED lights up when the 22k supply for the LNB is
switched on.
DVB-T/C
5V-T: The LED lights up yellow when the 5 volt power supply for
DVB-T antennas is switched on.
12V-T: The LED lights up yellow when the 12 volt power supply
for DVB-T antennas is switched on.
3. INFO
CHARGE: The LED lights up red when the unit is charging. The LED
lights up green when the unit is charged.
ERROR: The LED lights up if a fault has occurred on the cable or on
the LNB (e.g. short-circuit).
POWER: The LED lights up when the unit is ready for operation.
4. TV
Switches to live TV playback.
5. LED
Switches the LED light on the back on / off.
6. VOL + / –
Increases or decreases the volume in playback mode.
7. MENU
Switches to the main menu.
8. EXIT
Exits the respective menu.
9. SEARCH
Switches to the Satellite Finder.
10. STORE
Saves a screenshot of the current screen.
11. F-buttons
Function keys (depending on the menu item).
12.
Overview of the current function assignment of the F keys.
Swipe gestures with the touch screen:
• Swipe your finger up or down to change channels.
• Swipe from the top left to the bottom right to open the channel list.
• By swiping from the top right to the bottom left, you can enter a programme num-
ber directly.
• Swipe from right to left to exit Live TV mode.