![background image](http://html1.mh-extra.com/html/megasat/hd-390/hd-390_user-manual_1765150041.webp)
4. Main menu
DiSEqC 1.0 / DiSEqC 1.1
If the antenna is operated with a DiSEqC switch, here you can configure the DiSEqC input of the
selected satellite.
22KHz
In case you are using two antennas connected to a 22KHz tone switch box. You can supply either
22KHz by setting “OFF” to select antenna.
LNB (Polarisation)
The polarization switches at Universal LNBs between the vertical and horizontal plane. The default
setting (Auto) is correct in most cases.
Motor settings
If you operate your satellite dish with a motor, use the
t
u
buttons to select between USALS, DiSEqC
1.2 or None. At the bottom of the screen other settings appear. Use the corresponding color buttons
to get to the detailed engine settings.
USALS settings
BSet limit (red button): Choose between „Limitation off“, „West border“ and „East border“.
Limitation:
The mirror has no fixed limit to stop at a certain point.
West limit:
Press the t u buttons to turn the mirror to the east or west. Press until the desired position of the
western boundary is reached. Then save the settings.
Eeast border:
Press the t u buttons to turn the mirror to the east or west. Press until the desired position of the
east border is reached. Then save the settings.
Go to reference:
Press OK to get to the 0 ° starting point.
Set limit (green button):
Enter the latitude and longitude of the respective satellite here.
DiSEqC 1.2 settings
Set limit (red button): see USALS settings
Delete all (green button): Deletes all satellite positions of the motor.
15
ENGLISH
Summary of Contents for HD 390
Page 1: ...Bedienungsanleitung HD 390...
Page 27: ...user manual HD 390...