4.2 Installation
1. Satellitenliste
Here you can select the satellite that should
be considered in the search process. Confirm
the respective satellite with the OK button.
The satellite will be marked with a check-
mark. The following options are also possible:
RED button (add):
Here you can add a satellite. Assign a name and the longitude.
GREEN button (edit):
Here the name and longitude can be changed. Use the color buttons for
more options:
RED button:
to switch between uppercase and lowercase.
GREEN button: to delete characters.
YELLOW button: to confirm editing.
BLUE button:
to cancel.
YELLOW button (delete): Select a satellite with the pq buttons and then press the BLUE button.
The satellite you will delete is marked with an X symbol. After pressing
the EXIT button you will be asked if you want to delete the satellites.
BLUE button (search):
Satellite:
Select the satellite to be searched for.
Only FTA:
Select whether to search for all (including encrypted)
or only free-to-air programs.
Search channel:
Select the desired search function. Either TV + radio,
only TV, or only radio programs.
Network search:
Activate this option if there are new transponders that
have not yet been entered into the transponder list. The
network search can determine the frequency of new
transponders by analyzing data from known
transponders. The search process is faster than blind
scan, but there can still be missing stations.
2. Satellite settings
Select a satellite in the left window. Use the
u
button to change to the right field to adjust this satellite:
LNB Freq
Here you can set the LNB type as your satellite system. The default setting (Universal) is true in most cases.
DiSEqC 1.0 / 1.1
When the antenna is operated with a DiSEqC switch, here you can configure the DiSEqC input
(e.g. Port1 = Astra / Port2 = Hobird).
22K
Here, an additional 22 KHz switching value (on/off ). When operating a Universal LNB, this function
is not available.
Polarisation
Here you can select between AUTO (automatic), H (horizontal) or V (vertical). AUTO is true in most cases.
Motor settings
If you operate a motor on your satellite system, here you can choose between DiSEqC 1.2 and USALS
(or NONE for no motor).
SAT button (TP Set):
Here you switch between the satellite and transponder list. The
transponder list is edited in the same way as the satellite list.
OK button:
Marks a satellite to include it in the search.
INFO button:
Marks all satellites simultaneously.
EXIT button
Leaves the menu.
4. Main Menu
4. Main Menu
10
11
ENGLISH
ENGLISH
Search mode:
Choose between „Advanced search“ and „Blind Scan“.
The advanced search all transponders are stored in the
receiver searched. In blind scan the satellite (eg Astra
19.2 ° East) is searched for all transponders, even those
who are not already stored in the list. This process will
take some time to complete.
Search:
Start the search by pressing OK.