Content
02
03
Safety instructions
Please read this manual carefully before using this product and follow carefully
the installation, mounting and alignment instructions!
•
Any electrical or magnetic field near the flat antenna may cause poor reception
or even cause the unit to completely lose the signal.
•
Do not damage the plastic housing of the antenna. The housing protects the
antenna from moisture and weather.
•
Make sure that the antenna does not fall to the ground or be subjected to any
other impact, as otherwise the electronics inside may be damaged.
•
Do not open the housing of the antenna, as this will invalidate the warranty.
Leave repairs only to qualified personnel.
•
Obstacles such as buildings, trees, etc. can affect the signal of the satellite and
lead to the loss of the signal.
•
The antenna cover should always be free of dirt or other substances as this will
block the reception of the signal from the satellite.
•
The cable between the antenna and the satellite receiver must not be longer
than 30 m, as this will reduce the quality of the signal.
•
Using uninsulated jacks will result in loss of signal level.
•
Tighten all mounting screws when making adjustments to align the antenna.
•
This product contains a universal LNB, it is prohibited to add, replace or modify
an LNB.
Safety instructions ....................................................................03
1. Scope of delivery and designations
.............................04 - 05
2. Selecting a location
.............................................................06
3. Mounting options
.................................................................08
3.1 Basic mounting of the antenna ....................................09
3.2 Mounting on a mast ........................................................10
3.3 Mounting on a wall ..........................................................11
3.4 Mounting on a window ...................................................12
4. Prepare and lay coaxial cable
.........................................13
5. Align the antenna
................................................................14
6. Skew setting
...........................................................................15
7. Troubleshooting
...................................................................16
8. Specifications
.........................................................................17